| |
|
Cord |
|
|
If you're looking for parts
or cord for your Cellular, Honeycomb, Pleated Shade
shades you have came to the right place. |
|
|
|
|
0.9mm
String
|
1.2mm String |
|
|
It's about the same thickness
as........
|
|
0.9mm String.........A regular size
paper clip. |
| 1.2mm String.........A U.S. Dime or
a Compact Disc. |
| 1.4mm String.........Just less than
1/16th of an inch. |
| 1.8mm String.........A U.S. Nickel.
|
|
|
|
|
Cellular, Honeycomb, Pleated Shade |
|
Shades
Pull String Repair kit |
|
1
Clear Plastic Tassel
1
White Plastic Cord Joiner
4 Plastic Washers
1
Alabaster or White 1.8 Pull Cord
(4 foot long)
|
|
Price: $2.50 |
|
Stock#:KIT-PS
|
|
|
|
|
|
Order the string to make your own restringing
kit. |
| |
|
|
|
Complete
rebuild kit and parts for the most common RV Shades.
Click here |
|
|
CONTINUOUS CORD LOOPS & OTHER SPECIALTY CORDS
Continuous Cord Loops
Flat Lift Tape for Easy Rise Systems
|
|
Preventive Maintenance for Window Covering Products.
The main reason the string breaks in mini blinds is because the
slats are not completely open when raising and lowering the blind. Blinds
with slats should always be in the open position before pulling on the
string. Another reason the string will break is because the shade is
lifted to the exact same height every time it is opened, especially with
pleated and cellular shades. Often, the shades are lifted open all the way
to the top and then locked into place. The hardware, repeatedly, clamps
onto the string at the same spot, which causes the string to wear through
and then break. Be sure to always keep the blinds free of dust! Dust is
the number one reason for gears and mechanisms malfunctioning in Venetian
Blinds. When looking out of the window, Venetian Blind slats should never
be bent or separated (while trying to peek.) Always use the cords to tilt
the slats.
CORD
LOCK OPERATION
To raise or lock shade: Pull the cord down and inward, towards the
center of the shade. Stay as close to the shade as is convenient.
To raise or lock Middle or Bottom Rail of the shade: Pull the cord
down and inward to the center of the shade.
PLEASE NOTE: When raising the Middle Rail all the way up to the Head
Rail, the Bottom Rail should be raised a couple of inches. This prevents
pinching the Equalizer between the rails.
To lower or release Middle or Bottom Rail of the shade: Pull the
cord directly downward in the vertical position. |
